Principal Distritest

Machine à formettes – rapid koëthen – ISO5269

Formette de type 'Allemande' Rapid Koethen.

La machine à formettes rapid koethen est l'instrument de base du laboratoire papetier.

Une réalisation haut de gamme, unique pour des formettes parfates suivant ISO 5269

Description

Formette de type ‘Allemande’ Rapid Koethen.

Conforme à la norme ISO 5269, cet machine est unique sur le marché ;

Des matériaux nobles pour une durée de vie infinie.

  • Structure en inox.
  • Pompe en bronze.

 

Elle est totalement personnalisable :

  • Gestion du cycle automatique ou manuel.
  • Possibilité d’enregistrer simplement des recettes (paramétrage des temps de cycle).
  • Avec ou sans séchoirs.

 

Avantages :

  • Personnalisation
  • Fiabilité

 

 

Pour mémoire, un peu de lecture en anglais.

ISO 5269-1

ISO 5269-1:2005 specifies a method, using a conventional sheet former, for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical tests on these sheets in order to assess the relevant properties of the pulp itself.

ISO 5269-1:2005 is applicable to most kinds of pulp. It is not suitable for some pulps with very long fibres, such as those made from unshortened cotton, flax and similar materials.

This method is not suitable for the preparation of laboratory sheets for the determination of diffuse blue reflectance factor (ISO brightness) in accordance with ISO 3688

ISO 5269-2

ISO 5269-2:2004 specifies a method, using a Rapid-Köthen sheet former, for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical tests on these sheets in order to assess the relevant properties of the pulp itself.

ISO 5269-2:2004 is applicable to most kinds of pulp. It is not suitable for some pulps with very long fibres, such as those made from unshortened cotton, flax and similar materials.

This method is not suitable for the preparation of laboratory sheets for the determination of diffuse blue reflectance factor (ISO brightness) in accordance with ISO 3688.

ISO 5269-3

ISO 5269-3:2008 specifies two procedures for preparing a closed water system which is in retention equilibrium, to be used for the preparation of laboratory sheets from pulps with a high fines content. One procedure is applicable to the preparation of laboratory sheets using the conventional sheet former and the other using the Rapid-K’then sheet former. The sheets prepared prior to attaining retention equilibrium are discarded.

ISO 5269-3:2008 is especially applicable to mechanical and chemimechanical pulps, as well as to pulps prepared from recycled fibres, i.e. pulps with a high fines content for which retention of fines is poor when using the open water system as described in ISO 5269-1 or ISO 5269-2. ISO 5269-3:2008 isnot applicable to some very long-fibred pulps, such as those from unshortened cotton, flax and similar materials.

After retention equilibrium is attained, the preparation of laboratory sheets for testing the physical properties follows the procedures described in ISO 5269-1 (conventional sheet former) or ISO 5269-2 (Rapid-K’then sheet former), whichever is relevant.

ISO 5269-3:2008 is generally not applicable for the preparation of laboratory sheets from chemical pulps for which ISO 5269-1 or ISO 5269-2 are used.

ISO 5269-3:2008 is not applicable for the preparation of laboratory sheets for measuring ISO brightness. These sheets can be prepared in accordance with ISO 3688.

Brand

SMS-Labo

Instruments de mesure "Made in France"

Powered by WordPress. Designed by WooThemes